Durable, Full bodied coating to build structure of the flooring system and allow for pitch
STANDS UP TO AGGRESSIVE CLEANING TECHNIQUES: ANCHOR CRETE® Systems can be exposed to severe daily cleaning techniques, including live steam, hot water, aggressive detergents and disinfectants.

OFFERS PROTECTION FROM THERMAL SHOCK: ANCHOR CRETE® is unaffected by freeze/thaw cycles and withstands extreme temperature ranges while in service and during cleaning. Unlike other flooring systems, ANCHOR CRETE® won’t delaminate due to thermally induced stresses. It will withstand temperatures ranging from -50°F to +250°F.

CHEMICAL RESISTANT: ANCHOR CRETE® Systems are resistant to damage from caustics, organic and inorganic acids, solvents and most other commonly used chemicals.
Properties: Highly impact & abrasion resistant, Chemical Resistant, Thermal shock resistant
Recommended for: CIP rooms, coolers/freezers, production rooms, cool environments with hot water clean up

AB 25 Degrees Mortar Product Data Sheet

Anchor Bond® 25 Degree is a two component 100% solids epoxy designed for applications where temperatures are below freezing or a rapid patch is necessary.
RECOMMENDED FOR:
Cold storage areas
Freezers
Walkways
Support bases for tanks and seamless floors

AB 2500 Epoxy Grout Product Data Sheet 

Anchor Bond® 2500 Epoxy Grout is a three-component, troweled, epoxy mortar system. The system consists of an Epoxy resin, amine curing agent and selected, graded aggregates. It cures to an extremely hard, impact resistant mortar used under other overlayments. Anchor Bond® 2500 Epoxy Grout can be applied to establish pitch or fill holes up to 6” deep.
RECOMMENDED FOR:
Protective overlay on new floors
Repair and restore old, worn surfaces
Traffic aisles
Production, packaging and machine areas
Chemical processing areas

AB 2500 Epoxy  Product Data Sheet
Anchor Bond® 2500 Epoxy is a three-component, troweled, epoxy mortar system. The system consists of an Epoxy resin, amine curing agent and selected, graded aggregates blended with inorganic pigments. It cures to an extremely hard, impact resistant mortar which exhibits excellent abrasion, wear and chemical resistance.
RECOMMENDED FOR:
Protective overlay on new floors
Repair and restore old, worn surfaces
Traffic aisles
Production, packaging and machine areas
Chemical processing areas

AB Anchor Crete QTA Urethane  Product Data Sheet

Anchor Bond® Anchor Crete® QTA Urethane is a three component, urethane fortified cementitious coating which protects against harsh chemical attack as well as the stresses caused by thermal shock and high impact. An extremely strong floor, Anchor Bond® Anchor Crete® QTA Urethane can be used on both new and damaged surfaces.
RECOMMENDED FOR:
Interior or exterior applications
High impact areas
Areas where chemical attack is expected
Areas stressed by thermal shock
Areas with steam/hot water clean-up
Food Processing Plants
Coolers/Freezers
Chemical Processing Plants
Paper/Pulp Processing Plants
Waste and Recycling Facilities

AB Anchor Crete SCR Urethane Product Data Sheet

Anchor Bond® Anchor Crete® SCR (Screed or Camrake Formula) Urethane is a three component; urethane fortified cementitious coating which protects against harsh chemical attack as well as the stresses caused by thermal shock and high impact. An extremely strong floor, Anchor Bond® Anchor Crete® SCR Urethane can be used on both new and damaged surfaces.
RECOMMENDED FOR:
Interior or exterior applications
High impact areas
Areas where chemical attack is expected
Areas stressed by thermal shock
Areas with steam/hot water clean-up
Food Processing Plants
Coolers/Freezers
Chemical Processing Plants
Paper/Pulp Processing Plants
Waste and Recycling Facilities

AB Anchor Crete SL Urethane Product Data Sheet

Anchor Crete® SL Urethane is a three component, urethane fortified cementitious coating which protects against harsh chemical attack as well as the stresses caused by thermal shock and high impact.
RECOMMENDED FOR:
Interior or exterior applications
High impact areas
Areas where chemical attack is expected
Areas stressed by thermal shock
Areas with steam/hot water clean-up
Heavy forklift traffic and heavy foot traffic areas
Food Processing Plants
Coolers/Freezers
Chemical Processing Plants
Paper/Pulp Processing Plants
Waste and Recycling Facilities

AB Anchor Crete Cove Urethane  Product Data Sheet  
Anchor Bond® Anchor Crete® Cove Urethane is a three component, urethane fortified cementitious coating which protects against harsh chemical attack as well as the stresses caused by thermal shock. Anchor Bond® Anchor Crete® Cove Urethane can be used on both new and damaged surfaces. It is intended for 2”, 3”, or 4” 45° cove to create an integral transition between vertical and horizontal surfaces (walls & floors) to alleviate seams. It also allows for sanitary cleanup at wall-floor transitions. It is NOT intended for installing radius cove.

Anchor Bond™ Novolac Epoxy Mortar Product Data Sheet

Anchor Bond® Novolac Epoxy is a three component 100% solids epoxy mortar designed for applications where splash and spills of acids and chemicals occur.
RECOMMENDED FOR:
Traffic areas
Chemical troughs
Curbs
Tanks and chemical spill areas